onkeyo A-9110 Integrated Stereo Amplifier

In stock

Compare
Category:
Power Output 60 W/Ch (4 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, FTC)
Total Harmonic Distortion + Noise 0.08% (20 Hz-20 kHz, Rated Power)
Line 200 mV/220 k-Ohms
Phono MM 4.0 mV/47 k-Ohms
Phono MC 0.4 mV/120 Ohms
RC Output 0.2 V/2.3 k-Ohms (Line Out)
Phono Overload (MM) 70 mV (1 kHz, 0.5%)
Phono Overload (MC) 7 mV (1 kHz, 0.5%)
Frequency Response 10 Hz-100 kHz / +1 dB, -3 dB (Line 1, Direct)
Bass ±10 dB, 100 Hz
Treble ±10 dB, 10 kHz
Signal-to-Noise Ratio 107 dB (Line 1, IHF-A), 82 dB (Phono MM, IHF-A), 73 dB (Phono MC, IHF-A)
Speaker Impedance 4 ohms–16 ohms (A or B), 8 ohms–16 ohms (A + B)
Onkyo builds on the success of its A-9010 pre-main amp with the new A-9110 Integrated Stereo Amplifier, a component that refines an original amp design that’s won an excellent critical and commercial reputation for dynamic, musical sound. Lively dynamics, deep bass, and layered detail emerge from warm and expressive tuning. WRAT delivers high-current power stability via large custom capacitors, while low-NFB amps capture the depth and spatiality of analog and hi-res recordings. Five RCA inputs including MM phono stage connect your sources while high-quality speaker-posts reveal Onkyo’s hi-fi heritage and careful attention to detail. The A-9110 invites you into each album, the hours passing comfortably in pure analog sound.

STABLE HIGH-CURRENT POWER WITH WIDE-RANGE AMPLIFIERS

Dynamic changes in music cause impedance to fluctuate. If power can’t be delivered when impedance drops, sound quality suffers. Onkyo’s solution is WRAT, specifically its high-output EI transformer, huge custom-made main audio capacitors, and carefully selected high-quality parts. High-current stability controls the speaker-drivers for accurate and assured reproduction of dynamic musical passages. Further, the A-9110 features Onkyo’s time-proven low-negative-feedback amplifier topology that distinguishes the timbral warmth, fullness, and vibrancy of the recording. This circuitry captures a wide frequency spectrum with uncommonly low distortion.

SOUNDS CLEARER AT LOW VOLUMES

When playing music at low volume, the signal normally drops close to the component’s noise floor. The signal picks up noise, which is amplified, and the result is muffled sound. To avoid this, the A-9110 features Optimum Gain Volume Circuitry, a volume circuit that requires less than half the usual amount of attenuation. The signal never approaches the noise floor, so you can enjoy clearest sound at low volume.

×






Main Menu

onkeyo A-9110 Integrated Stereo Amplifier

𝐖𝐞𝐥𝐜𝐨𝐦𝐞 𝐭𝐨 𝐀𝐔𝐃𝐑𝐈𝐗𝐒

𝐈𝐧𝐝𝐢𝐚'𝐬 𝐅𝐢𝐧𝐞𝐬𝐭 𝐀𝐮𝐝𝐢𝐨 𝐕𝐢𝐬𝐮𝐚𝐥  𝐂𝐨𝐦𝐩𝐚𝐧𝐲

| Low-Cost-EMI |Free Home Delivery
This is default text for notification bar